Jai

Before using a JAI camera, the ‘JAI SDK x64 Version 3.0.7.0.exe’ must be installed. The ‘JAI GigE Vision Filter Driver - NDIS 6 Filter Driver for JAI GigE Vision Cameras’ must be activated on all LAN adapters with a JAI camera.

See also
Viper.NET Dependencies
../../_images/jai_01_main.png

  1. General settings: Image Source Editor

  2. Driver Type: Specifies which driver is used for the JAI cameras. This parameter is defined by Viper.NET and cannot be changed.

  • Filter : Use JAI GigE Vision Filter Driver (recommended)

  • Socket : Use Windows Socket Driver

  1. Assign Cam by:

  • Serial number: The associated camera is assigned via the serial number.

  • IP Address: The associated camera is assigned via the IP address.

  1. Acqu. Timeout: Maximum image recording time in [ms].

  2. Camera list: Selection list of all cameras. The list can be updated with the ‘… - Button’ to update the list.

  3. Camera Feature Tree: All camera parameters are displayed here. The selected parameter can be changed using the ‘Set button’. However, this setting is NOT permanent and is not saved. Parameters can only be saved in the UserSet of the camera (UserSetControl node).

Hint

The ‘JAI Control Tool’ program can be used to change parameters and save them in the camera.